Your needs, this model
Does it fit your priorities?
Can I wash a vehicle from a container of water?
Yes. The original setup puts the filtered draw-hose end into the water source and runs from the removable battery.
Explore this need in the finder →Does the documented kit include the pack and charger?
Yes. The original parts list identifies both. Check the actual offer against the full kit rather than assuming a later tool-only listing has them.
Explore this need in the finder →Is there a real high/low control?
Yes. The cleaner has a pressure-adjustment button. The manual gives one rated pair, not a separate numerical output for every button setting.
Explore this need in the finder →Choose it for the water route, not a big pressure headline
The TG-PW2C 0360 is a handheld battery cleaner for a shopper whose main problem is reaching a suitable place to rinse. Its supplied draw hose and filter can take clean water from a separate source, while the removable battery avoids a mains lead at the tool. That is a practical advantage beside a vehicle or in another location where carrying water is easier than extending a garden connection.
It belongs in the portable-cleaner category. The documented rated output is 360 PSI and.48 GPM, with 536 PSI listed separately as maximum pressure. Do not compare it with a full-size pressure washer by dropping the rated figures and keeping only the largest headline.
The kit and battery system are specific
The original parts list includes theSP-PW2001 battery pack and its charger. The tool is 20 VDC; the charger’s listed input is 100–240 V at 50/60 Hz. Charging compatibility does not mean the cleaner operates directly from a wall outlet.
Confirm that an actual offer includes the same kit. A tool-only package is a different starting point. Also, a 20 V label does not establish compatibility with WORX, DEWALT or any other battery family. The useful system identifier here is Tyger’s documented pack, not voltage alone.
Drawing clean water changes the preparation
The assembly guide connects the draw hose to the cleaner and places its filtered intake into the water source. Keep that intake clean and use the water quality specified by the maker. The inlet temperature limit is 104°F. The filter is an important part of the setup, not an optional obstacle to remove when flow drops.
The manual also warns that a pressurized source can discharge water without the trigger being pulled. Follow the exact connection and control instructions rather than treating every supply arrangement as identical. Plan where the cleaner, hose and source will sit before starting.
High/low pressure and nozzle pattern are separate
The cleaner has a pressure-adjustment button as well as a multi-spray nozzle. That establishes an actual high/low operating choice. It does not provide a separate numerical pressure-and-flow pair for every setting. The single rated 360 PSI/.48 GPM reference should not be reassigned to all modes without qualification.
Choose the pattern and setting according to the surface. The manual’s domestic-use examples include vehicles, woodwork, patios, brickwork and garden tools. It also distinguishes high-pressure car washing from lower-pressure watering. These examples do not guarantee that a concentrated stream is safe for every coating, decal, seal or piece of wood.
The soap bottle is included
The reviewed kit has a soap bottle with a foam-adjustment control. Fit it according to the attachment instructions and use the specified pH-balanced cleaner appropriate to the surface. The foam dial controls that application; it is a separate feature from the high/low pressure button.
This is helpful if a light wash-and-rinse routine is the goal. A supplied bottle does not make the cleaner a heavy paving-restoration machine, and the package does not contain a broad-area surface-cleaner head or turbo nozzle. If those are essential, compare a different documented arrangement.
Portable use still needs realistic planning
The outlet is a direct handheld wand, while the hose in the parts list is the inlet draw hose. Do not mistake its length for additional high-pressure outlet reach. Move the water source and manage the inlet route deliberately instead of expecting a conventional long outlet-hose layout.
Battery condition, chosen mode and the available water affect a session. The manual’s runtime range is not a promise of uninterrupted high-output use under every condition. Test the planned setup before relying on it for a larger job and recharge with the correct charger.
After use, disconnect the pack for care, clean the filter and connectors and protect the cleaner from freezing. Choose the TG-PW2C 0360 when a supplied battery-and-draw-hose kit solves a portable rinsing need. Choose a conventional washer when sustained higher working output and a fixed garden supply are the more important requirements.
Source: Tyger Auto TG-PW2C 0360 original manual, including its parts list, application guidance and technical table.
Key details at a glance
| Documented hand-carry arrangement | Yes |
|---|---|
| Hose reel | No |
| Supported detergent application | Yes |
| Detergent container included | Yes |
| Battery included | Yes |
| Charger included | Yes |
| Surface-cleaner attachment included | No |
| Turbo nozzle included | No |
| User pressure-control mode | Yes |
| Maker-supported commercial use | No |
| Manufacturer maximum pressure | 536 PSI |
| Documented rated or working pressure | 360 PSI |
| Documented rated or working flow | 0.48 GPM |
| Maximum inlet-water temperature | 104°F |
| Power and package | 20 VDC tool using documented SP-PW2001 pack; included charger 100–240 V 50/60 Hz 400 mA, not mains operation. |
| Water-supply arrangement | Supplied filtered draw hose goes into clean water; manual also warns about pressurized source behavior. |
| Spray equipment | 3-in-1 nozzle and separate soap-bottle attachment; Hi/Low button. |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
Find a cleaner for your outdoor jobs.
Match your tasks, power and water supply, then compare the exact package and working limits.