Model assessment · Mi-T-M

Mi-T-M CM-1400-1MEH Hand-Carry Electric Pressure Washer review

A hand-carry electric washer with a triplex pump, pressure-adjusting unloader and 25-foot working hose.

Sources checked 2026-10-20 · Our editorial approach

We may earn from qualifying purchases. Compare the exact model, size and package.

CM-1400-1MEHIllustrated overview
A useful fit for

Home cleaning where actual pressure control and a carry frame suit the job, with an appropriate US outlet and cold-water supply.

The main tradeoff

The 45-pound net reference is substantial for lifting. Current 13.5A and linked-manual 15A references differ; static draw is not an included portable bucket kit.

Your needs, this model

Does it fit your priorities?

Can I choose real pressure adjustment in a carried electric machine?

The exact configuration specifies an adjustable unloader and hand-carry frame. Its 45-pound net reference is not a lightweight lifting guarantee.

Explore this need in the finder →
Can I use a bucket with the standard package?

The manual discusses conditional static draw, but requires adequate flow and lists a separate filter. The standard package is not matched as an included bucket-draw kit.

Explore this need in the finder →
Is 1400 PSI an operating pump specification?

The linked original specification gives 1400 PSI at the pump and 1.5 GPM. It is a documented reference, not detergent-stage output or a measured result at every nozzle.

Explore this need in the finder →

Real pressure control in a hand-carry machine

The Mi-T-M CM-1400-1MEH is a corded electric washer with a hand-carry frame, triplex pump and pressure-adjusting unloader. Its useful distinction is actual pressure regulation in a machine that moves by lifting rather than on a supplied cart.

That arrangement can suit a fixed household cleaning station or short transfers between locations. It is less attractive if you picture pulling a light trolley around a large property. The maker's 45-pound net reference is substantial before you manage hoses, accessories or retained water.

Separate the regulator from the spray pattern

The exact specification identifies an adjustable unloader. The included lance also provides a variable high/low and spray-pattern arrangement. These controls have different purposes; changing fan width alone should not be described as the pump regulator.

A regulator helps configure the machine, but it does not identify which pressure is safe for a particular paint film, seal or timber board. Follow the equipment and surface instructions. A lower setting is not permission to use an unsuitable technique.

The pump rating has a location

The linked original manual specifies 1400 PSI at the pump and 1.5 GPM. That is the documented operating reference. It is not a measurement at the end of every hose, with every accessory or while applying detergent.

The outlet hose has its own pressure-capacity specification, which should not be confused with the washer's output. The original working hose is 25 feet long. If you need more reach, verify the permitted extension arrangement instead of adding arbitrary sections.

Check the actual electrical nameplate

The reviewed US configuration is 120 V single phase. The current maker page lists 13.5 A, while the linked original manual gives 15 A and 60 Hz. Those references should not be silently combined into one assumed edition.

Check the actual nameplate and provide the correct protected supply. The original instructions also require appropriate GFCI protection and electrical checks. Changing or bypassing protective devices is not a way to make an unsuitable outlet work.

Static draw needs more than a bucket

The manual discusses non-pressurized static draw, explaining that adequate flow may depend on raising the supply tank or using a larger inlet hose. It also lists a separate filter for static draw. That describes a conditional water supply, not a promise that the standard package can lift water from any bucket.

The specification still requires at least 20 PSI and 3 GPM inlet supply, with a 5/8-inch-minimum internal-diameter hose no longer than 50 feet. This review uses the documented pressurized garden-feed setup. A proposed gravity feed needs verification against the actual instructions and required flow.

Expect pump care and a separate soap stage

The triplex pump has oil service points and a sight glass. The original instructions cover checking oil, installing the correct vented plug and following the service schedule. A serviceable pump is not a promise of maintenance-free ownership.

Detergent uses the low-pressure stage and a separate container. The included injector does not mean an onboard tank is included, nor that soap flows at the pump's rated rinse pressure. Choose compatible cleaning agent and flush the chemical path afterward.

Who should choose this format

CM-1400-1MEH makes sense when pressure control, the triplex configuration and a carry frame suit a station with verified power and water supplies. It is not the obvious choice for someone who needs wheels, an included enclosed surface cleaner or a ready bucket-draw kit.

Compare the actual configuration and lifting requirement before the pressure headline. These practical constraints determine whether a suitable pump is also a workable tool for your home.

Key details at a glance

WheelsNo
Documented hand-carry arrangementYes
Supported detergent applicationYes
Detergent container includedNo
Surface-cleaner attachment includedNo
Turbo nozzle includedNo
User pressure-control modeYes
Documented dry-tool weight45 lb
Included working outlet hose25 ft
Power-cord length35 ft
Documented rated or working pressure1400 PSI
Documented rated or working flow1.5 GPM
Power and packageUS 120V, 60Hz single-phase configuration. Current maker page lists 13.5A; linked original manual lists 15A. Check the actual nameplate and suitable protected supply.
Water-supply arrangementCold supplied water: the original specification requires at least 20 PSI, 3 GPM, a minimum 5/8-inch internal-diameter hose and maximum 50-foot inlet length. Static draw has additional flow and filter conditions.
Pump and operationTriplex pump with oil fill, drain and sight glass. Check oil and vented plug, and follow the pump service schedule.
Spray equipmentThe unloader provides actual pressure control; the variable high/low lance changes the spray arrangement separately. Detergent applies at low pressure from a separate container.

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this assessment

Find a cleaner for your outdoor jobs.

Match your tasks, power and water supply, then compare the exact package and working limits.